Dental Model Trimmer for Laboratory - NEUBER

Brand:NEUBER

Reference:DTX-U1019

Manufacturer Ref.:U1019

-30%
33800€
Price VAT included(0%)€338.00
Recommended price€482.86

Dental laboratory equipment:

  • Supply voltage: A - 220 V/50 Hz ±10% / B - 110 V/60 Hz ±10%.
  • Power supply: 550 W.
  • Engine speed: 2800 rpm.
  • Dimensions: 44 × 35 × 35 cm.
  • Machine weight: 20 kg.
33800€

Email me when it's back in stock

Best sellers ranking:

You have 15 days to return it.

Description

NEUBER Dental Model Trimmer

Benchtop wet trimmer for trimming and adjusting plaster models in the dental laboratory, with a 550 W motor, manual water supply and resin disc.

NEUBER dental laboratory model trimmer

Precise Model Trimming

Designed to trim and adjust plaster dental models comfortably and efficiently. Its 2800 rpm motor helps achieve an even finish in laboratory and prosthetic work.

Water system of the NEUBER dental model trimmer

Wet Working System

Features a water connection and drain hose for wet trimming. This system helps reduce the dust produced by the plaster and promotes a cleaner working environment.

NEUBER benchtop dental trimmer for the laboratory

Robust Benchtop Design

Laboratory unit with a stable structure and a weight of 20 kg, designed to sit on the workbench and provide security while trimming dental models.

Model Trimmer Applications

Plaster models
Suitable for trimming and adjusting dental models made of plaster.
Dental prosthetics
Useful for preparing models for prosthetic and restorative work.
Orthodontics
Allows study and working models for orthodontic treatment to be shaped.

How to Use

1. Connect water
Connect one end of the water hose to the wet trimmer's nozzle and the other end to the tap, then open the valve.
2. Fit drain
Connect the drain hose to the unit to remove the water produced during trimming.
3. Switch on
Plug in the power cable and operate the switch. [O] is off and [I] is on.
4. Check braking
When braking, it is normal to hear a click before the abrasive disc stops. If the disc makes unusually loud noises, remove it and use the hex key supplied to adjust the rear cover screw (18).
5. Check disc
Turn it by hand and observe: if the platform wobbles by more than 2 mm, replace the disc. After replacing it, tighten platform ring 8 (the one closest to the outside of the abrasive disc).
WARNING
Possible causes of abnormal noise during operation:
  • The shaft is loose.
  • The disc is not flat enough.

Technical Specifications

Performance and operation

Power
550 W
Speed
2800 rpm
Disc type
Resin disc
Water supply
Manual
Water pressure
0.5–2 kg
Trimming
Wet, with drain

Power supply

Voltage A
220 V / 50 Hz ±10 %
Voltage B
110 V / 60 Hz ±10 %

Dimensions and weight

Dimensions
44 × 35 × 35 cm
Weight
20 kg

Questions and answers

There are no questions yet. Be the first to ask one!